
Ripple Qwerty Pager 'Ultra' firmware - for Wio Tracker L1 Pro 
=============================================================

Connect a USB cable to the device, then press the Reset button twice (quickly).
This should mount the device as a drive to your computer.

Just copy the 'Ultra-WiTrackerL1...uf2' file to this new drive, and the firmware will be 
installed.

If your device has had other firmware flashed to it, it's best to do a Full Erase first. To do this, just copy
The 'Flash_erase...uf2' file to the drive. The drive will then unmount as the device reboots. Repeat the steps
above to install the main .uf2 file


Free, But Limited
=================

This software uses the 'freemium' model. Most of the features are free, but the more advanced 
features will require you to purchase an Unlock Code. The Unlock Code can be purchased by 
going to the link below and purchasing the Unlock Code:
   https://buymeacoffee.com/ripplebiz/e/249834

NOTE: you MUST enter your Serial Number (displayed on the screen) when prompted during the purchase
of the digital item. You will receive a reply message with your Unlock Code, which you then 
enter into the Unlock screen on the device.
